By continuing to use our site, you accept our, Rode Lavalier Lapel Microphone [Unboxing], Rode Lavalier Lapel Microphone Unboxing & Review @rodemics, Hide your lavalier mic with the RØDE invisiLav, 60 Seconds on Set: Lavalier Mounting Basics, 60 Seconds on Set: Lavalier Mounting Basics (continued), Yardbless Pro Shooter - RODE Lavalier Microphone Review, Diego Stocco - The Making of DTS Sound Signature, Click to find an authorised RØDE seller >>, Read the complete review at: dvgeartalk.blogspot.com.au. 25% Off. Our microphones require at least 1V of power. Let’s take a closer look at what you need to know about each. Most lav mics feature an omnidirectional capsule, meaning they pick up sound from all directions and are therefore quite forgiving when recording. Wireless systems are comprised of two main components: a transmitter pack, which is attached to the subject and captures and transmits the audio, and a receiver pack, which plugs into the recording device and receives the audio from the transmitter wirelessly. -33.5dB re 1 Volt/Pascal (21.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz, 1 year with free extension to 5 years following registration here. To keep your video looking clean and professional, you may want to consider concealing the cable. When we record a small car (in motion) at 12 feet plus in length or a large battle tank (in motion) at over 32 feet long , we can place the lavaliers from the engine and exhaust areas to where I sit inside the vehicle using multiple RØDE extension cables. Just be sure to keep the mic clear from any other piece of clothing that may rub against it, as this will be audible in your recording. This may seem confusing but just remember – grey connectors are TRRS for plugging into computers or mobile devices; black connectors are TRS for plugging into audio devices and cameras. If the cable on the smartLav+ isn’t quite long enough to reach your device, or you need some extra leeway to move around, you can use a RØDE SC1 extension cable. The Lavalier's low self-noise, user friendly omni-directional polar pattern and minimal appearance make it an ideal solution for film, television, video, theatre, house of worship and anywhere where a high quality microphone needs to be heard but not seen. This is a good option for vlogging, recording a tutorial, or any video where you are seated in front of the camera. You can avoid this with a looser neckline, or by mounting the mic over to the side, rather than directly below the chin. If you are recording into a DLSR, mirrorless or compact camera, or an audio device like a portable recorder, you will need a lavalier mic with a TRS jack, such as the RØDE Lavalier GO. These jacks look very similar, but with RØDE products we’ve made it easy to identify what type of connector your microphone has but colour-coding them: all TRRS connectors are grey, so they can be plugged directly into computers and mobile devices; all TRS connectors are black, so these can be plugged directly into regular audio and camera equipment. This ensures you can get clean, clear audio in a variety of recording situations, whether that’s vlogging, reporting to-camera, or recording an interview. The first thing I noticed was the lightness and thinness of this mic. ExDemo. Unlike standard thick XLR cables, I can run these thin RØDE extensions without having to use so much gaffers tape to secure them on fast moving vehicles. The receiver (RX-CAM) features an OLED display with information on level, battery status (receiver and transmitter), mute and channel selection. Standard 'plug-in power' will be able to supply this. There are two things to consider here: what kind of device you are plugging it into and whether you need to connect wirelessly or not. Now you can slip the windshield back on. When positioning a lavalier mic, it’s important to think about its proximity to your sound source (usually you or your subject’s mouth) in order to get the best sound possible. Once you have your lavalier set up, simply plug the receiver into your camera using the supplied patch cable and you’re ready to go. The Wireless GO is an ultra-compact wireless microphone system that is unique in its clip’n’go versatility and incredibly compact form-factor. However, as a general rule, it’s recommended that you position the mic on the chest, about a hand-span distance (20-30cm) from the mouth. Rode Wireless Microphones. MiCon Cable for Select Sennheiser Lemo Devices, Double-Toothed Clothing Pin Mount for Lavalier, MiCon Connector for Select Lectrosonics Devices, MiCon Connector for Select AKG and Audix Devices, MiCon Connector for Select Audio Technica Devices, MiCon Connector for 3.5mm Select Stereo Devices, MiCon Connector for Select Sennheiser Devices, We use cookies to understand how you use our site and to improve your experience. (Audio Comparison vs Video Mic Pro | Canon 70D) Using Rode SmartLav Lapel Microphone on an Android Phone. When it comes to using mics with a 3.5mm jack, such as lavalier microphones, you need to pay close attention to what kind of output your microphone has and what kind of input your recording device has – specifically, whether they are TRS or TRRS. Of course, if you prefer using a standard lavalier mic, there is an input for this too. Your film, made easy Positioning a lavalier mic is easiest when there is an edge of clothing to secure it to, such as the lapel of a jacket, seam of a button-up shirt, or the edge of a tie. Or if you want to get creative, mounting the mic underneath a headband also works well. You can simply tuck it out of sight under your jacket or run it inside your shirt. Once you have your lavalier mounted and positioned nicely, the next step is connecting it to your recording device. Rode smartLav+ Microphone for … The Lavalier GO is the perfect option. All lavs come with a clip that allows you to mount the mic onto a piece of clothing. Click here for an in-depth look at how to mount a lavalier mic on yourself or talent. There are a number of options in the RØDE range, but for a compact, affordable and easy-to-use solution, the Wireless GO is perfect. The RodeLink Filmmaker Kit by RODE is a complete wireless microphone system for filmmakers and videographers. The TX works as a stylish clip-on microphone or as a beltpack for a RØDE lavalier microphone – perfect for content creation, filmmaking, to-camera or onstage presentation, vlogging, YouTubing, streaming and more.