U.S. Pat. I guess this should be so simple that even a caveman could do it, but I have no idea how to connect the two. And how do I secure the mic in the shock mount hole? Shock mounts also sometimes have holders or clamps on them that you can use to attach your microphone to them if you don’t want to or can’t use a threaded connection. The grooves 104 and 106 are flat, and accommodate a pair of elastomeric bands 108 and 110 which are identical to the bands 98 and 100 are are illustrated in FIGS. 9 is a broken away isometric view of the microphone mounting device constructed according to the teachings of the present invention; FIGS. 5. Be aware that the threading comes in certain sizes, with ⅜” and ⅝” being the most common. A shock and vibration isolating mount for a microphone and the assembly of such a mount with a microphone in which the mount has a lower frame mounted on the post of a stand by a swivel. The upper and lower frames each carry a pair of closed bands of elastomer material under tension, one pair of bands extending transversely around the lower frame in spaced relation and the other pair of bands extending transversely around the upper frame in spaced relation. No. 2,776,462 to Burroughs entitled MICROPHONE CLAMP is an example of such a structure. 13 and 15, and the parts are provided with mating protrusions 30 and recesses 32 to achieve a fixed alignment and to provide a continuous inner surface 24, as illustrated in FIG. It's a Rode NT1 if that's any help. The surface 86 of the latch member extends into abutment with the surface 92 of the upper frame 14 and is held in this position by the resiliency of the plate 72, thereby latching the upper frame 14 with respect to the lower frame 12 in the one pivotal position. Set up shock mount - YouTube A screw 128 threadedly engages the internal threads of the sleeve 126 to lock the bifurcated member 120 in position on the tab 36. 2, respectively; FIG. No. Yahoo fait partie de Verizon Media. Privacy Policy 2.) This DIY Shock Mount Takes Just Minutes to Assemble with No Hardware Required Shares; By V Renée . Many performers and speakers find it desirable to use a microphone stand during their performance, and it is often desirable for the performer or speaker to hand hold the microphone at certain times during the same performance. Apparatus for shock-mounting a microphone comprising a compact, resilient mounting member defining a socket adapted to receive a microphone body and means for supporting the mounting member in a desired position. I just needed something basic that would hold my microphone in a fixed position. The latch has a flat plate 72 which is constructed of resilient material, and may be bent as illustrated by the dashed lines in FIG. © 2004-2020 FreePatentsOnline.com. 4.5 out of 5 stars 444. The upper frame 14 also shown in FIGS. 7 and 8 are side and front elevational views of one of the bands illustrated in FIG. The microphone 10 further stretches the bands and increases the tension. 10, 11 and 12 are top elevation, front elevation, and transverse sectional views, respectively, of one portion of the swivel illustrated in FIG. Such microphone clamps however could only be used with microphones designed for use with that particular clamp, since microphones of other sizes could not be engaged by the clamp. The mass of the microphone and the compliance of the bands forms a mechanical moving system with a resonance below the frequency range of the microphone. 4.5 out of 5 stars 444. The barrel 16 in the particular microphone is cylindrical, but the present invention may be practiced with microphones having variations in shape from that illustrated. Don't worry that it isn't assembled yet; you can assemble it and put the mic in once it is affixed to your mic stand. The other leaf 66 is mounted on the upper frame 14 adjacent to the edge 58, with the pin 68 disposed confronting the edge 58. The suspension boom and a table clamp. The mounting assembly is provided with a latch 70 best illustrated in FIGS. The mic filter firmly fixes to your mic with the combination design of elastic bands and inner rubber ring. 3.) This might be the easiest DIY filmmaking build you ever do. The added foam pad to the microphone clamp to prevent the microphone from damage and scratches. The microphone is disposed between the upper and lower frames and between the first pair of bands and the second pair of bands, and the frames are provided with a latch mechanism at their edges opposite the hinge to prevent the frames from opening from a closed position to an open position except when the microphone is to be removed from the mount. 1 extends between the edges 48 and 46, thus confronting the inner surface 24. 17, 18 and 19 are front elevation, transverse section and longitudinal section views of the upper frame member illustrated in FIG. The bands are of elastomeric material, such as rubber or plastic, urethane of forty-five durometer having been found satisfactory. $18.99. A pair of flat bands 98 and 100 are disposed in the grooves 94 and 96 and extend about the lower frame 12. is satisfactory. The material of the bands 98, 100, 108 and 110 adheres to the surface of the microphone 10 and holds it in position without the need of adhesives or the like due to the nature of the material and the fact that the bands are under tension. 1; FIG. A hinge 62 shown in FIGS. It is an object of the present invention to provide a microphone mounting device which may be used with a floor stand, desk stand, or a boom, which will isolate the microphone from shock and vibration carried by the stand or boom, and which will permit removal of the microphone for hand held use without disconnecting the microphone from its electrical cord and without the necessity of carrying any part of the mounting assembly with the microphone during hand held use. In addition, the edges 58 and 60 which extend between the surfaces 50 and 52 of the upper frame 14 are also flat and parallel to the axis of revolution of the surfaces 50 and 52. Such microphones are often disconnected from a stand by providing a disconnecting adapter between the shock mount and the stand, but the shock mount remains with the microphone during hand use in such arrangements. The plate 72 carries at its upper end a latch member 78 which is secured thereto by a rivet 80 extending through apertures 82 and 84 in the plate 72 and latch member 78. Such shocks and vibrations will cause movement of air relative to the microphone, and hence an electrical pickup from the microphone. This is the side you want facing the sound source for the best result. microphone when you are recording. 7 and 8. It is also an object of the present invention to provide a mounting device for the microphone which may be used with microphones having widely varying external dimensions, and particularly such a mounting device which will achieve isolation from shock and vibration carried by any stand the device is mounted on and which will permit removal of the microphone during use without the necessity of electrically disconnecting the microphone from its cord or carrying portions of the mounting structure with the microphone during hand held use. The bands 108 and 110 are under tension and extend about the upper frame 14 in the grooves 104 and 106 and across the edges 58 and 60 to confront the surface 52, the portion of the bands 108 and 110 confronting the surface 52 being designated 112 in FIG. 13. 9 through 12 lower frame 12 is mounted on a stand post 114 by means of a swivel coupler 116. 4 and 5 are sectional views of the latch taken along the line 4--4 of FIG. In this manner, the upper frame 14 may be pivoted with respect to the lower frame between two positions, one position in which the edges 48 of the lower frame and 60 of the upper frame are in abutment and the other position in which these edges are remote from each other. The upper frame 14 may be pivoted with respect to the lower frame 12 by manually bending the plate 72 away from the upper frame 14 to translate the surface 86 of the latch member away from the surface 92 of the upper frame 14, thus permitting the upper frame to be pivoted on the hinge 62. For ease of fabrication, the lower frame 12 is constructed of two separate parts 26 and 28, as best illustrated in FIGS. 3,155,780 to Burroughs entitled MICROPHONE AND MOUNTING MEANS ASSEMBLY discloses a microphone mounting structure using elastomer bands between the stand and the microphone itself in which the compliance of the bands forms a mechanical resonance with the mass of the microphone which is below the audible frequency range of the microphone. Boseen Microphone Shock Mount Mic Holder - Anti Vibration Spider Shockmount Compatible with Many Condenser Mics Like AT2020 MXL 770 MXL 990 Samson G Track Pro Rode Procaster NT1-A Neumann U87 etc. As a result, the performer desires to be able to remove the microphone from a microphone stand or to replace the microphone at will, and further, to use a microphone which is not encumbered with mounting structure when hand held.